This Fiber Drawing Machine is made for operator skill independent use in production and laboratory settings. Two basic model configurations permit the user to select between a set up for standard linear proof testing and with additional mandrels for rotary high strength testing. How well do you know fiber optic cables? If you don’t have a lot of details about the cables below are a few facts that you should know about them:

Optic Fiber Isn’t Fragile – Although an optic fiber is made of glass plus some of the areas require plenty of care, a total fiber is made in a way that it’s capable of withstand even the most rugged installations. For example, cat 5/5e/6/6A has a pulling tension of 25 pounds. There are many optics that can withstand over 200 pounds of pulling tension.

Research studies show that the fiber optic can withstand higher pulling tension than copper. Furthermore, it’s rated for larger temperature ranges and is also safe from EM/RFI interference.

Fiber Is A Lot More Secure – Since information is carried in the cable, the information is safer than in other cables; therefore, it’s hard to hack the information. While it’s challenging to hack the data inside the cables, it doesn’t mean they can’t be hacked. The reason being all you need to do is to have the network tap and physical accessibility cable and it will be possible to hack it.

It’s Easy to Install The Cable – Whilst the cable was hard to install a few years ago, stuff has changed now as technologies have changed. In order to install the cable you only need to contact installation professionals and also the cable will likely be installed within a very short time.

The Cables Aren’t Impacted By Environmental Conditions – Because the fibers carry light, they aren’t disturbed by changes in temperature, cold, rain or any other environmental condition. This may not be the case with copper cables which can be usually affected by environmental conditions. For example, when it’s cold, the cables transmit data faster than when it’s hot.

They Support Wireless – The cables are heavily employed by telecommunication companies to hold wireless telephone signals from your towers for the central network. The fibers are preferred by many companies because of the large bandwidth and long term compatibility with the network equipment.

Just like copper cables, NEC (National Electrical Code) requires indoor Optical Fiber Coloring Machine be marked with their fire and smoking ratings. NEC requires all indoor fiber cables be marked correctly and installed properly because of its intended use. According to NEC, a building’s inside area is divided into three kinds of sections: plenums, risers and general purpose areas.

A Plenum area is really a building space utilized for air flow or air distribution system. In many buildings, the area above a drop ceiling or within a raised floor is used as the air return (supply of air) for your air conditioning. Those drop ceiling and raised floors can also be where fiber cables are often installed. If those cables were burning, they might emit toxic fumes and the rhnnol would be fed to the rest from the building by the air conditioner. As a result, people may be injured even though they may be a long way through the fire.

Conclusion – These are some of the facts that you should know about optic cables. When choosing the units you need to ensure that you buy them from authorized dealers. After buying them you need to make sure that you set them up professionally. If you don’t hold the skills you ought to hire a skilled professional to install them for you. We manufacture various kinds of Sheathing Line including Optical cable sheathing line and several other equipment. Visit the given links to know more about us.

FTTH Cable Production Line..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.