Now that your home bar or man cave has its own kegerator to cool and dispense that frothy beer you adore a great deal, it might be wise to get acquainted with a few of the essential elements of your kegerator. One of the most basic parts of your kegerator is definitely the keg coupler.
What the Keg Coupler Does? Consider the keg coupler being a “key” as well as the valve of any keg because the “lock”. They cannot work without each other. The keg coupler attaches to the device and also to a CO2 compressed gas line. It allows the compressed air to enter the keg and drive out the dark beer.
Because of many of these elements working together, you receive a perfectly ice cold and delicious draft beer in the comfort of your home.
Varieties of Keg Couplers – Here is where it turns into a small bit more challenging. Depending on what sort of dark beer style you have inside your kegerator, you may need a various form of coupler in order to serve it correctly.
To find the correct coupler for your home use, you have to know the manufacturer/kind of dark beer you serve, know in which it was brewed or how big keg it is in. The reason being you can find six various kinds of keg couplers. Right here is a quick rundown from the various kinds of commercial keg couplers.
D Coupler – Fits U.S. Sankey Keg Valves
A Coupler – Fits Most German Keg Valves
G Coupler – Suits Some Western Keg Valves
M Coupler – Suits Some German Keg Valves
S Coupler – Suits European Sankey Keg Valves
You Coupler – Fits Some Western Keg Valves
In order for the beer to get served properly, it requires to hold the correct kind of coupler that matches the valve in the keg. The kind of coupler you will need will depend on where that particular beer was kegged.
For instance, the American Sankey “D” System coupler is readily the most popular. It fits all household brand name kegs, as well as 95Percent of American beers. If this is actually all you happen to be considering consuming out of your kegerator, then this could be the coupler you should choose.
If you have any questions concerning what sort of keg coupler you require, it will be a good idea to call your neighborhood supplier, the store from where you got your keg or perhaps even the brewery alone. For fast guide on the most common beers, please make reference to our useful listing of keg couplers needed for different brands of dark beer.
How to Install Your Keg Coupler
To set up your keg coupler for your kegerator, you have to initially affix the Carbon dioxide regulator to the CO2 cylinder. Be sure that the cylinder is filled as well as the valve is shut. Then, securely pair in the regulator to the CO2 cylinder. Attach the gas line to the “gas out” dock around the regulator and secure in place having a clamp. Then, attach the other finish in the gas line towards the “gas in” dock around the coupler. Following, affix the dark beer line towards the liquid out port on the coupler.
Now, you are prepared to get in touch the coupler towards the keg. Be sure that the CO2 tube vale is incorporated in the “off” place and also the pull handle in the coupler is incorporated in the diagonal/top position. Get the locking neck in the kegerator, and turn the coupler clockwise 25°. Then, take out on the handle, drive it down to the keg device and launch the handle. This can lock the coupler in ejqnby and securely attach it for the kegerator.
Using the coupler attached to the keg, slowly switch on the Carbon dioxide tube. Around this point, you are going to listen to gasoline flowing through the CO2 tube and regulator from the keg coupler and in to the keg. Draw on the stress comfort device to allow gasoline to vent and provide you with an accurate reading on the stress measure, then calibrate the regulator towards the recommended serving stress for the dark beer. You might be now prepared to serve your very own draft dark beer.